A Dalton company - serving Dallas, TX

Rheem Capacitor Replacement Nationwide | Dalton Heating & Air Dallas

Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Rheem Capacitor Replacement: The Dallas Owner’s Guide

A Rheem capacitor replacement in Dallas typically runs $150 – $350 installed, depending on whether it’s a single or dual-run capacitor and which Rheem model you have. We keep common Rheem-spec capacitors on our trucks across the Dallas metro, so most jobs are done same-day. A capacitor is the small cylinder inside your outside condenser unit that stores and releases the burst of voltage your compressor and fan motor need to start turning. In Dallas heat, these parts fail often – sometimes without warning – and the first sign is usually an air conditioner that hums but won’t spin up, or a fan that won’t move at all.

HVAC technician performing professional furnace repair and maintenance on a residential furnace nationwide

Call (254) 280-5320

Which Rheem Models This Applies To

Rheem uses capacitors across nearly every residential AC line they’ve built in the last twenty years, including the Classic, Prestige, and Econet-enabled series. The part number you need depends on the microfarad (µF) rating printed on the side of your existing capacitor, not just the model number of the unit. For example, a Rheem RA14 condenser might take a 35/5 µF dual-run capacitor, while a larger RA17 could need a 45/5 µF. A dual-run capacitor handles both the compressor and the fan motor in one housing – that’s the “35/5” style the technician reads off the label. A single-run capacitor only serves one motor. You always match the µF rating and voltage (usually 370 or 440 VAC), never the physical size. Rheem units built after 2015 also lean hard on the oval-shaped GE Genteq capacitors, which is what a lot of OEM Rheem parts actually are, just re-labeled. Quality aftermarket options from Genteq, Titan HD, and AmRad hold up well in Texas heat. Cheap generic capacitors from a big-box shelf? We’ve pulled too many bulged ones out of Rheem condensors to recommend them.

Explore

Styles & brands we work with

Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Goodman
Goodman

Signs Your Rheem Capacitor Replacement Is Failing

  • AC hums but the fan doesn’t spin. The compressor is trying to pull start-up voltage, but the capacitor can’t deliver it. This is the classic failed-capacitor call we run in Oak Cliff and across Dallas every summer.
  • Fan turns slowly or starts only with a push. A weakening capacitor can’t get the fan motor up to speed on its own. Homeowners often notice this before the system quits completely.
  • The top of the capacitor is swollen or domed. Heat buildup inside the capacitor makes it bulge. A flat-topped capacitor is what you want; a domed one is done.
  • Outside unit cycles on and off every few minutes. The capacitor can’t hold voltage steady, so the compressor kicks off on thermal overload. In a Dallas August, that’s a system cooking itself to death.
  • AC runs but blows warm air. The compressor won’t start, so the condenser fan whips around by itself while the system pushes uncooled air through the house. You hear noise, you get no cooling.

Replacement Cost & What’s Included

In Dallas, expect to pay $150 – $350 for a Rheem capacitor replacement depending on whether it’s a single-run or dual-run capacitor and the µF rating your system requires. That covers the part, the service call, the diagnostic testing to confirm the capacitor is actually the failure point, and the install. The price is in writing before any work starts. Always.

Capacitor Type Installed Price Range (Dallas)
Single-run capacitor (fan OR compressor) $150 – $225
Dual-run capacitor (fan + compressor combined) $200 – $350
Hard-start kit (if compressor needs extra boost) $250 – $350

Marco Benitez trains every Dalton Heating & Air Dallas technician to confirm the old capacitor’s rating before touching the new one, so you get the exact replacement your Rheem unit calls for, not whatever part happens to be on the truck. The repair is guaranteed in writing for a full year. If the capacitor fails in that window, we return at no charge. That’s The Garrison Standard, and it’s non-negotiable.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Capacitors store high voltage even after power is cut. A charged capacitor can hit you hard enough to knock you off a ladder, and the wrong capacitor wired in can burn out a compressor that costs thousands to replace. This is not a fan belt. We’re not going to hand out a step-by-step on this one for that reason. What you can safely do: confirm the symptom (humming, no spin), kill power at the breaker, and write down the µF and voltage numbers on the capacitor label so you can tell us over the phone what you’re looking at. Then call (254) 280-5320 and let a trained tech discharge the old part, match it correctly to your Rheem, and have your system spinning again. Marco will tell you what it costs before he opens a panel.

HVAC technician performing professional furnace repair and maintenance on a residential furnace nationwide

FAQs

Contact Dalton Heating & Air Dallas

If your Rheem is humming, not spinning, or blowing warm air, call (254) 280-5320. We’ll confirm the capacitor is the problem, quote you a fixed written price before anything gets touched, and stand behind the repair for a full year under The Garrison Standard. Dalton Heating & Air Dallas is an independent service provider, not affiliated with Rheem, but we service Rheem systems across Dallas every single week.

Written by Marco Benitez, Owner & Lead Technician, Dalton Heating & Air Dallas at Dalton Heating & Air Dallas, serving Dallas and nearby areas.

Need HVAC help in Dallas? Licensed & insured · 1-hour response · free estimates
Call (254) 280-5320
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Dalton Heating & Air Dallas responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and consent to being contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch